21 Thin Porcelain Pendant Lamp
21 Thin Porcelain Pendant Lamp
In stock
Couldn't load pickup availability
Molded & Hand-Finished Porcelain Chandelier · Organic Ceramic · 10 Standard Configs · Custom Available
Each porcelain element of the 21 Series is shaped in a purpose-designed mold, so every piece comes out at a consistent size across the whole installation. Each element is then finished by hand — trimmed and refined one by one — so edge profile and surface texture vary subtly from piece to piece. The exterior surface is left unglazed: raw, matte, and slightly textured like the outside of an unfinished ceramic vessel. The interior receives a clean glaze, which the light source reads against when lit — a warm reflected glow emerging from within an organic, hand-finished shell.
Ten standard configurations — grouped into round Rouny canopy, linear Long canopy, and square canopy formats — scale from a single pendant to a 50-head installation reaching 500 cm in drop height. Custom head counts and canopy arrangements are available on request for residential, hospitality, and commercial projects.
Features
Molded, Then Hand-Finished
Every porcelain element is formed in a purpose-designed mold for consistent size, then refined by hand — edge profile and surface texture vary subtly between pieces.
Raw Outside, Glazed Inside
Unglazed exterior preserves the raw ceramic surface. Glazed interior reflects the light source into a warm inner glow.
Three Canopy Formats
Round Rouny, linear Long, and square canopy — each suited to different ceiling geometries and installation contexts.
Seam lines and variation are normal. Each element is molded and then finished by hand, so faint mold seam lines may remain visible on the unglazed exterior, and edge profile and surface texture vary slightly from piece to piece. These are normal characteristics of molded, hand-finished porcelain — not a quality issue or defect.
Configurations — Choose at Checkout
All drop heights listed are fixture body height only — not including ceiling canopy. Hanging wire is included at the length shown and cut to final height during installation.
| Heads | Overall Dimensions | Hanging Wire |
|---|---|---|
| Round Canopy (Rouny) — suited to square rooms, dining tables, entryways | ||
| 1 head | ∅ 14 × H 18 cm ∅ 5.5″ × H 7.1″ | 150 cm / 59″ |
| 3 heads | ∅ 15 × H 200 cm ∅ 5.9″ × H 78.7″ | 200 cm / 78.7″ |
| 5 heads | ∅ 20 × H 250 cm ∅ 7.9″ × H 98.4″ | 250 cm / 98.4″ |
| 7 heads | ∅ 20 × H 250 cm ∅ 7.9″ × H 98.4″ | 250 cm / 98.4″ |
| Long Canopy — suited to rectangular tables, corridors, linear spaces | ||
| 11 heads | L 80 × H 300 cm L 31.5″ × H 118.1″ | 300 cm / 118.1″ |
| 14 heads | L 80 × W 23 × H 300 cm L 31.5″ × W 9.1″ × H 118.1″ | 300 cm / 118.1″ |
| 21 heads | L 80 × H 400 cm L 31.5″ × H 157.5″ | 400 cm / 157.5″ |
| 26 heads | L 100 × H 400 cm L 39.4″ × H 157.5″ | 400 cm / 157.5″ |
| 36 heads | L 110 × H 400 cm L 43.3″ × H 157.5″ | 400 cm / 157.5″ |
| Square Canopy — suited to large-format installations and double-height spaces | ||
| 50 heads | ∅ 80 × H 500 cm ∅ 31.5″ × H 196.9″ | 500 cm / 196.9″ |
Custom configurations available. Head counts, canopy dimensions, and drop heights beyond the standard range can all be specified. We accommodate bespoke installations for hotels, restaurants, galleries, and high-ceiling residential projects. Contact us with your ceiling height, desired spread, and head count before ordering — lead time for custom builds is longer than standard stock.
Ceiling height requirement: configurations with H 300–500 cm drop heights require a minimum ceiling clear height of 4–6 m. Confirm your installation height before ordering. The 50-head square canopy (H 500 cm) is designed exclusively for double-height or atrium spaces of 6 m or above.
| SKU | RDC-144009 |
| Standard Configs | 10 configurations · 1 to 50 heads |
| Canopy Types | Round (Rouny) · Linear (Long) · Square |
| Color | White (single option) |
| Materials | Unglazed porcelain (exterior) · Glazed ceramic interior |
| Process | Molded for consistent sizing · Hand-finished piece by piece |
| Socket | G4 Bi-Pin · Bulbs not included · User-replaceable |
| Voltage | AC 110V only · Do NOT use with 12V low-voltage transformers |
| Dimming | Compatible with dimmable G4 bulbs and appropriate dimmer switch |
| Custom | Head count · Canopy size · Drop height · Contact us before ordering |
| Mounting | Hardwired ceiling canopy · Standard junction box (larger configs may require reinforcement) |
| Best For | Hotel lobbies · Restaurants · Galleries · Double-height residences · Stairwells |
G4 socket voltage warning — read before purchasing bulbs. This fixture uses G4 bi-pin sockets rated for AC 110V mains voltage only. Most G4 bulbs on the market are designed for 12V low-voltage systems — using a 12V bulb in this fixture will result in immediate failure or fire risk. When sourcing replacement bulbs, you must specifically purchase G4 AC 110V rated capsules. Do not use standard G4 12V halogen or LED capsules.
Downloads
FAQ
Which canopy type and head count suits my space? +
Start with the shape of your space. The Round (Rouny) canopy (1–7 heads) suits square rooms, circular dining areas, bedrooms, and entryways where the installation drops from a single center point. The Long canopy (11–36 heads) is designed for rectangular tables, corridors, and linear spaces — the canopy runs lengthwise and distributes heads along a linear axis. The Square canopy (50 heads) is a large-format installation for double-height spaces and atriums. For head count: more heads means more density and light output, not always a larger footprint — refer to the dimensions in the configuration table to confirm fit.
Can I order a custom configuration? +
Yes — head counts, canopy sizes, and drop heights beyond the standard range are all available. We regularly produce custom installations for hotels, restaurants, galleries, and residential projects with non-standard ceiling heights or specific spatial requirements. Contact us with your ceiling height, room footprint, desired head count, and any reference images before placing an order. Custom lead time is longer than standard stock.
Will the pieces look exactly like the photographs? +
Very closely. Every element is formed from the same mold design, so size, shape, and proportion stay consistent and match the photographs. Because each piece is then finished by hand, small differences in edge profile and surface texture between elements are normal. This is inherent to hand-finished porcelain and is not a defect.
Are faint mold seam lines a defect? +
No. A fine seam line forms where the parts of a ceramic mold meet. Each piece is trimmed and refined by hand, but on the matte, unglazed exterior a faint line can still show, especially in side light. It is a normal mark of the molding process, does not affect how the fixture works or lights, and is not a quality issue or defect.
What bulbs does it take, and where do I find them? +
This fixture uses G4 bi-pin sockets at AC 110V mains voltage. This is not the standard G4 12V low-voltage type found in most hardware stores — you must source G4 bulbs specifically rated for AC 110V. Search for "G4 AC 110V LED capsule" from lighting specialist retailers. Using a standard 12V G4 bulb in this fixture will result in immediate bulb failure. Bulbs are not included.
Return And Refund Policy
Return And Refund Policy
Returns
We offer a 90 business days return policy, meaning you have 90 business days after receiving your item to request a return.
To be eligible:
Items must be unused and in original condition
Must include original packaging
Proof of purchase is required
Damaged or Incorrect Items
If your item arrives damaged, defective, or incorrect:
Free return or replacement
No return shipping cost
Please contact us within 7 days of delivery with photos for quick assistance.
Change of Mind
If you wish to return an item due to personal reasons (e.g., you don’t like it):
Return shipping cost will be the customer’s responsibility
Item must be unused and in original packaging
Return Process
Contact us at support@kikolight.com
Provide your order number and reason for return
We will send return instructions and address
Ship the item back as instructed
Refund will be processed after inspection
Returns sent without prior approval will not be accepted.
Physical Return Address
Contact: Johnny
Return Address: Dengdu Lighting Accessories City, No. 48, Qijiang Road, Guzhen Town, Zhongshan, Guang Dong, China
Refunds
Refunds are issued to your original payment method
Processing time: 7 business days (depending on your bank)
Non-Returnable Items
Customized or made-to-order items
Used or damaged items not caused by us
Order Cancellation
Orders can be cancelled within 12 hours after purchase.
After this period, orders may already be processed or shipped.
Delivery Guarantee
If your order is not delivered within 90 business days, you are eligible for a full refund.
Get In Touch
Have questions or need assistance? Our team is always here to help. Feel free to reach out to us through any of the following methods:
Business Name: Kiko
Contact: Johnny
Return Address:
Dengdu Lighting Accessories City
No. 48 Qijiang Road
Guzhen Town, Zhongshan
Guangdong 528421
China
Email: support@kikolight.com
Phone: +86 18948862306
Business Hours:
Monday - Friday: 9:00 am - 6:00 pm (GMT+8)
Customer Support Hours: Monday - Friday 9:00 am - 6:00 pm (GMT+8)
Response Time: Our customer support team responds to all inquiries within 24 - 48 hours.
We are committed to making your shopping experience simple, secure, and worry-free.
